E Book Analogue Electronic Circuits and Systems

E Book Analogue Electronic Circuits and System 


E Book Analogue Electronic Circuits and Systems
E Book Analogue Electronic Circuits and Systems









Author(s): A. Basak
Series: Electronics Texts for Engineers and Scientists
Publisher: Cambridge University Press, Year: 1991
ISBN: 0521360463,9780521360463


Describe:

This is a basic book on analog circuits for electrical and electronic engineering students. Analogue circuits are used in various fields, such as microcomputer interaction and computer aided design (CAD). Topics covered include transistor circuit technologies and amplifiers, operating amplifiers, oscillators, closed-loop loops, modulation, data acquisition and distribution, and computer aided circuit design. Basic electronics have been omitted so that they can properly focus on designing the most popular and useful circuits, and the author focuses on the details and practical applications of the material covered. In addition, each chapter also contains a large number of practical examples and many carefully selected problems at different levels of difficulty.

Introduction

This book is especially intended as text for undergraduate students from Electrical and electronic engineering at the intermediate level to some degree Course. However, some materials may be appropriate for the final year.
Each The topic was deliberately chosen and focused on Operating amplifier circuits and applications, data acquisition Analysis and design of circuits and computers. Other useful topics Addressed in some details are the analog filter circuits and Closed phase loops. A list of pre-knowledge of this text is given In the first chapter.

This book is best suited for students because (i) is a specific topic Region, the analog circles are highlighted for the most advanced students And (ii) special attention has been paid to the descriptive treatment of Details and practical applications, such as CAD and not in theory Analysis, because these areas are often neglected and necessary  Practicing engineers.
So it is hoped that students and engineers alike This text will find useful and informative,
but is less analytical than many other texts The books are currently available and thus are able to cover a wide range of topics During a certain period of time.
Several carefully identified problems were identified Various levels of difficulty are included at the end of each section for help Readers gain a better understanding of the topics under discussion.

I would like to thank my parents and my immediate colleagues alike Academic and Industrial to encourage and advise them on Prepare the manuscript.
Thanks also to the staff Cambridge University Press to support them during many stages of Produce.
I am also grateful for Paul Ling's research assistance The student Fatih Anaiee to examine the problems.
In recent years there has been rapid progress in electronic circuit design The main reason for this is the advancement in digital technologies.
This size It differs from the texts available on the market at the present time in two Respects. It first covers only analog electronic circuits and systems; Second, the basic electronics are omitted so that they can focus appropriately Due to the most popular and useful analog electronic design Circles. The following are the basic conditions for studying this text:

(A) P-N link diodes: operating principles both forward Reverse mode, characteristic equation, resistance and intersection Capacitance, zener diodes.
(B) Interconnect transistors: principle of operation, common emitter (CE), Combined Aggregate (CC) and Common Base (CB) configurations, Fixed properties, Active definition, Cut and Separate Saturation regions, concept of loading lines and need
Bias, transistor as an amplifier.

(C) Amplifiers: voltage and current gains (Av and At) and inputs f Output impedance (Rin and # out), concept of frequency response Use the / z parameter of the transistor to analyze the circuits, Medium range frequencies for CE, CC, and CB configurations Av9 Ai9 Rin account and Rout per case.

(D) Field-effect transistor: principle of operation and static characteristics, Loading lines, bias circuits, are used as an amplifier. 

(E) Positive and negative feedback and its advantages Negatives.

(F) Operational amplifiers: ideal amplifier, inversion analysis, Unconverted, differential, buffer and summer amplifiers, use Operational amplifiers as integrators and trade-offs.

A comprehensive list of books covering the above topics is provided at End of this volume. Standard symbols are used throughout the text and Glossary is included as one of the appendices.

In the second semester you run many of the basic circuits that are It is usually described in most integrated circuit chips. Department Also dedicated to analyzing multi-stage amplifiers and methods Especially choose the correct configuration for transistor amplifiers The theater. These are included in the text for the identification of the reader Operational amplifier Integrated circuit which is the building block for most Analog circuit. 

The principle of operating tuned subwoofers briefly Shown in the penultimate section. In the last section different types of Power amplifiers are studied. Various types of heat 
sink are used Energy circles were also discussed in this section. 

Chapter 3 deals with operational amplifiers in great detail, but at a level Higher than the introductory level which is [one] required knowledge, As mentioned above. Circuits are analyzed and designed on the assumption Operational amplifiers to be perfect, 
but in practice it is not.

In this Therefore, the defect begins to operate Speakers, and their effects on various operational amplifier's circuits The ways readers can reduce these effects.
Many linear widely used Nonlinear circuits are discussed using the amplifiers at The remaining sections of this chapter. 
Its main applications Operating amplifiers are in the active filters, so readers will find both
Resistor resistor capacitor and capacitor switch active filters, which are Discuss this chapter with design examples, somewhat helpful. 
The principles of The design of waveform and functional generators as well as analogue calculation using operational amplifiers is thoroughly studied the next day Section.

The following three chapters describe oscillators and phase-locked loops Various types of modification respectively. Design principles and Operating oscillators using transistors, amplifiers and quartz Crystals were introduced.
The most common uses for closed loops In the field of communications as well as in the field of engine speed control It is discussed to a limited extent, with the full treatment of the theory of phases with phases that will help readers with similar understanding and design Circles.

In Chapter 7, under the heading Data Acquisition and Distribution The systems, analog to digital, and digital-to-analog conversion techniques are discussed in great detail. Sample and retention circuits, multiplexers Demultiplexers are also studied in great depth. 

Error analysis in Individual circles are discussed as well as in complete systems. 
At the age of Computerized measurement in research and in most aspects of observation
Organizing this chapter is an important part of the text. 

The last chapter deals with computer aided analysis and electronic circuit design. Describes various computer aided design models Pay special attention to the Ebers-Moll model of the transistor.
Models for Dipole junction and field effect transistors as well as integrated circuits
Described. 

Small ac signal technologies, d. And transient analysis Circles are discussed with the help of examples.

Several commercially Available computer programs are also discussed. 
Two programs are widely used Packages are described with the help of circuits and their analysis for Make students familiar with drawing and analysis procedure Various active and passive circuits.

To summarize it can be said that this folder is on the electronic analog The circuits and systems are mainly written with consideration Undergraduate requirements for the intermediate level. Practical engineers interested in various aspects of the analog electronic circuit

The design will also find this text useful.







Publier un commentaire

0 Commentaires